How To Get Water Out Of Charging Port

If your iPhone or Lightning accessory is wet – Unplug all cables or accessories. Don’t plug them in again until they’re completely dry. To dry your iPhone:

Tap your iPhone gently against your hand with the Lightning connector facing down to remove excess liquid. Leave your iPhone in a dry area with some airflow.
After at least 30 minutes, try charging with a Lightning cable or connecting a Lightning accessory.
If you see the alert again, there is still liquid in the Lightning port or under the pins of your Lightning cable. Leave your iPhone in a dry area with some airflow for up to a day. You can try again to charge or connect a Lightning accessory throughout this period. It might take up to 24 hours to fully dry.

Here are a few things not to do:

Don’t dry your iPhone using an external heat source or compressed air.
Don’t insert a foreign object, such as a cotton swab or a paper towel, into the Lightning connector.
Don’t put your iPhone in a bag of rice. Doing so could allow small particles of rice to damage your iPhone.

Contents

1 How do I get liquid out of my charging port?
- - 1.0.1 How long does water take to get out of charging port?
- 1.1 Will water come out of charging port?
2 Will liquid in charging port dry?
- - 2.0.1 Will water in my charging port ruin my phone?
3 Can you override wet charging port?
4 Can I dry my phone with a hair dryer?
5 Will a phone dry out by itself?

How do I get liquid out of my charging port?

How to Get Water Out of Charging Port: 7 Tricks That Work Learn how to safely dry your Android’s charging port and your iPhone’s Lightning port Oh no! Your phone is wet! What should you do? The most reliable way to get water out of a charging port is to turn off your phone and allow it to air dry completely.

Turn off your phone immediately and dry it off with a lint-free cloth.
Allow the charging port to air dry in a well-ventilated area for at least 5 hours.
To get excess water out of your phone, gently tap it against your hand with the charging port facing down, so water can drip out.
Avoid using rice to speed along the process. Instead, place the phone in a room with a fan, and/or place silica packets near the charging port.

1 Turn off your phone right away. No matter how water resistant your phone is, power it down immediately when it gets wet. Don’t be tempted to turn your phone back on until you’ve thoroughly dried the charging port, headphone jack, and other components.
- If there is anything plugged into your phone when the charging port is wet, such as a charging cable or battery-extending case, remove that as well.
- If your entire phone is wet (not just the charging port),, SIM card, and any external memory cards. If you’re using an Android with a removable battery, remove that too.
2 Use a lint-free towel to dry all visible water. Wipe every part of the phone or tablet with a clean, dry, lint-free towel. Microfiber is a great material for this, as it’s highly absorbent and dries quickly. Continue wiping until you’ve that you can. Advertisement
3 Gently tap your phone against your hand with the charging port facing down. Make sure the charging port is facing down before you tap the phone on your hand—if the port is facing up, water can run deeper into your phone. Continue tapping your phone on your hand until you’re sure all excess water has dripped out.
4 Allow the phone air dry in a well-ventilated area. The best way to get water out of the charging port is to let it evaporate naturally. Air circulation will dry the port faster, so let the phone dry in a room with fans, a dehumidifier, or any other moving air source.
- If you don’t have a fan, you can also try drying the charging port near an electrical appliance that has an exhaust vent, such as behind your computer or TV. Just avoid very hot airflow—never use a blow dryer or place the phone too close to a heater.
- Keep the charging port facing down while your phone dries, if possible.
5 Allow the phone to dry for at least 5 hours before turning it back on. Apple recommends allowing your phone to dry for 5 hours before turning it back on or connecting a charging cable to the Lightning port. The recommendations for Android models vary, but waiting at least 5 hours should be long enough for the charging port in any phone to completely dry.
- Don’t turn your phone on any sooner to avoid damaging your phone.
- Once the charging port has dried long enough, turn on the phone and watch for a “Liquid Detected” alert. If you see this alert, turn off the phone again, and wait another few hours for it to dry.
- Do not select to allow your wet phone to charge because this will damage your phone.
- If your phone was submerged, there may be more water that you can’t see. Continue drying the phone for 24-48 hours for stubborn cases.
6 Speed up the drying process. If there is still water in the charging port, there are a few other tricks you can try:
- If the phone is taking too long to dry, around the base of your phone to absorb excess moisture. You can also place the phone in a sealable bag with a few silica packets (after letting the phone air dry) to absorb more moisture.
- Use a can of compressed air to blow out remaining water from the charging port. Spray in gentle, short bursts, and only once or twice, from several inches away.

1 Don’t place your phone in direct sunlight to dry. It’s okay to dry your phone outside in warm weather, but avoid exposing it to extreme temperatures. Putting your phone in direct sunlight can cause it to overheat and cause more damage.
2 Don’t put your phone in rice. Even if the water in your charging port is hard to remove, putting your phone in rice will not speed up the drying process. Plus, the dust from the rice or particles from the rice could get into the charging port and other openings and cause damage.
- Instead, use silica gel packets. The loose silica particles are contained in a bag, which prevents tiny pieces of the substance from getting inside your phone and damaging it.
3 Don’t insert any foreign objects into the charging port. Putting anything inside your phone’s charging port is a bad idea because you could push the moisture further in. Cotton swabs, toothpicks, and paper towels can all damage your charging port.
4 Don’t use a hair dryer. The heat of a blow dryer can damage the electronics inside of your iPhone or Android. If there’s still a lot of water in the charging port after using our drying tricks, you can gently blow into the port with your mouth—just don’t spit in the port by accident! You can also use gentle bursts of compressed air.

There are some signs that your phone has been wet too long and has, If, after removing water from the charging port, your phone exhibits any of the following signs, it’s best to turn to a professional for repair:
- Visible corrosion on the charging port.
- Your phone doesn’t power on or the phone powers on, but the screen stays black.
- Your phone is getting hot easily indicates that the battery may have gotten water damage.
- The speakers sound weird, like one may not work and the other does.
- A foggy screen that,
- Your phone says “No SIM Card” even if there is one inserted.

Question Will my device start charging again after the water has dried? If your device hasn’t sustained any significant hardware damage from the water, it will likely start charging again once it’s dried. Make sure you wait until it’s completely dried before plugging it back in though, to avoid further damage. It’s best to wait a few days for it to completely dry.

Ask a Question Advertisement Written by: wikiHow Technology Writer This article was co-authored by wikiHow staff writer,, Darlene Antonelli is a Technology Writer and Editor for wikiHow. Darlene has experience teaching college courses, writing technology-related articles, and working hands-on in the technology field.

Co-authors: 2
Updated: March 28, 2023
Views: 16,496

Categories:

Thanks to all authors for creating a page that has been read 16,496 times. : How to Get Water Out of Charging Port: 7 Tricks That Work

How long does water take to get out of charging port?

How Long Does It Take To Dry a Charging Port? Depending on the method you use to get rid of water in a charging port, it may take 1 to 2 hours. Making sure that all the water is dry before using your phone again or charging it is essential to ensuring your phone remains undamaged.

Will water come out of charging port?

Water will naturally evaporate from the charging port within approximately 1 to 2 hours. If any liquid other than fresh water enters the charging port of your device, you must rinse it in fresh water and dry it thoroughly with a dry, soft cloth.

Will liquid in charging port dry?

If your iPhone or Lightning accessory is wet – Unplug all cables or accessories. Don’t plug them in again until they’re completely dry. To dry your iPhone:

Tap your iPhone gently against your hand with the Lightning connector facing down to remove excess liquid. Leave your iPhone in a dry area with some airflow.
After at least 30 minutes, try charging with a Lightning cable or connecting a Lightning accessory.
If you see the alert again, there is still liquid in the Lightning port or under the pins of your Lightning cable. Leave your iPhone in a dry area with some airflow for up to a day. You can try again to charge or connect a Lightning accessory throughout this period. It might take up to 24 hours to fully dry.

Here are a few things not to do:

Don’t dry your iPhone using an external heat source or compressed air.
Don’t insert a foreign object, such as a cotton swab or a paper towel, into the Lightning connector.
Don’t put your iPhone in a bag of rice. Doing so could allow small particles of rice to damage your iPhone.

Will water in my charging port ruin my phone?

Submersion in water – If your Android smartphone or iPhone gets submerged in water, it can cause water damage as water invades every opening in the handset. To repair water damage in the phone’s charger port, consider mastering ways to get water out of the charging port.

Can you override wet charging port?

Should you use emergency override mode? – Using your charger while the iPhone is still wet can cause permanent damage to your devices and accessories. But if it’s an emergency, you can override the liquid detected in lightning connector message and charge your phone.

You can do so by removing the charging cable and then re-inserting it. The same “liquid detection” message will appear, but you’ll now have the option to tap Emergency Override and charge your phone. If you have a wireless charger, we recommend using that instead of plugging your phone into a socket to avoid further damage in the lightning port.

Just make sure the back of your device is dry before you try charging it wirelessly.

How long does it take for the moisture notification to go away?

Let the device air dry for at least 24 hours before turning it on again or plugging it into power, or else further damage may occur.

How do you dry a USB port?

Step 2: Check the USB-C port & cable – Look for moisture or debris inside the USB-C port and cable. Do not put anything into them.

If the port or charging cable is wet, turn off your phone. Then set it on a flat surface to dry at room temperature.
If the port or charging cable has debris inside, gently tap it against your hand, port down, to remove.

Should I emergency override liquid detected?

What NOT To Do – If you have exposed your iPhone to water, and the alert pops up, you may be tempted to try to fix the problem quickly. But there are a few things you shouldn’t do when the “Liquid Detected in Lightning Connector” alert appears on your iPhone. For one, you shouldn’t click the emergency override button on the alert.

You could severely damage your iPhone, causing more problems in the long run.
Additionally, don’t try to dry the lightning connector using an external heating source like a hair dryer or heater.
The heat could damage the battery or worsen the corrosion.
You also shouldn’t try blowing the water out using compressor air, or even your mouth, as you’re more likely to push the water further into your phone.

Despite what many may suggest, you shouldn’t shove cotton swabs or paper towels into the connector either. While these can absorb moisture, you’ll more than likely damage pins further or push other debris deep into your phone.

Can I dry my phone with a hair dryer?

Wet Phone? How To Dry Out Your Phone and Waterproof It July 3, 2012 – intro: We humans can’t get enough water during the summer, but for our gadgets, on the other hand, there may not be a bigger enemy. Sadly, you may already know what we mean if you’ve landed at this article.

Maybe your phone fell in the pool.
Maybe it fell in the toilet, or maybe someone spilled a large glass of water on the dinner table.
Whatever it is, we’re deeply sorry.
But not all might be lost.
Below we have put together a list of ways to help you resurrect your wet phone and prevent accidents from happening in the future.

All these methods are highly dependent on what sort of phone or gadget you have and how bad the water damage is, but let’s dive right in! quicklist: 1category: Dry Out Tip #1 title: Bowl of Rice url: text: Of course, the first thing you should do with your wet phone is dry it off.

Yes, it sounds obvious, but really dry it off. Get a towel and sop up all the water you can. You can even use a straw. (Okay, don’t do that if you dropped your phone in the toilet.) Do not – we repeat, do not – use a blow dryer; the heat can damage the phone. If you have a phone or a gadget with a cover that comes off, take it off, and take out the battery, the SIM card, and anything else that can easily be removed.

Dry all those things off. The next step might seem a bit crazy, but get a bowl and fill it up with rice. Yep, regular rice from the supermarket. Bury your phone in the bowl and keep it in there for 12 to 24 hours. Rice absorbs moisture and has long been used as a wet-gadget-saving measure.

It doesn’t always work.
While the rice method saved a wet Samsung Android phone of ours, it didn’t do the same for an iPhone that had been dropped in the toilet.
Again, all these methods are highly dependent on what sort of phone or gadget you have and how bad the water damage is.
Media: 16697868caption: related: quicklist: 2category: Dry Out Tip #2title: Bheestie Bags url: text: Silica gel packets are an alternative to rice.

And a company called Bheestie actually sells a special bag that is meant just for saving your wet gadgets. The bag costs $18.14 (or $20.00 at some places) and has special packets inside. They aren’t your typical silica gel packets either – the little packets have a special molecular sieve desiccant formula, according to the company.

Open the bag, drop your phone in for 24 hours, and the phone might just come out working again.
The bag did work with an old BlackBerry, but we didn’t have an extra iPhone for a test.
According to the company, the bag soaks up water 700 percent better than rice.
It is available through Amazon.com and other e-tailers.

media: 16697843caption: related: quicklist: 3category: Preventive Tip #1title: Waterproof Case, Lifeproof url: http://www.lifeproof.com/text: Of course, there is no surefire way to know if you will be able to save your phone once it has suffered water damage.

But there are a few ways to make sure your phone doesn’t get damaged in the first place.
The first way? Buy a waterproof phone case.
One of the best choices is a case from Lifeproof.
The $80 case is pricey but it is waterproof down to depths of six feet.
It is also shockproof and dust-proof.
It’s easy to get on, though there are a few steps first (cleaning it out, etc.).

When we dunked it in a pool we were able to actually take pictures with it underwater. Thankfully, we also made sure the charging port was closed before jumping in the shallow end. There are also other waterproof cases from companies like Outterbox and DryCASE.

Media: 16697787caption: related: quicklist: 3category: Preventive Tip #2 title: Liquipel url: text: But there’s a downside to those cases.
They are clunky and include a plastic coating on top of your screen, which is why Liquipel is one of the coolest solutions out there.
Liquidpel isn’t an actual case but rather a special treatment that can make your phone entirely waterproof.

You send your phone off to the company. They apply a water-safe coating to your phone and send it back to you. The most insane part? When you get the phone back, you won’t be able to tell the difference. It doesn’t add any weight to your phone and it really is hard even to see the coating.

Liquipel says the treatment is more for prevention – in case you spill something on your phone or drop it in a toilet – but we decided to throw it in a pool. When we fished it out it and dried it off it was as if nothing had happened. The treatment is available for the iPhone and a number of Android phones, including the Droid RAZR Maxx and the Galaxy Nexus.

The price depends on how quickly you want the phone turned around and where you live, but it starts at $59.00. media: 16697812caption: related: : Wet Phone? How To Dry Out Your Phone and Waterproof It

Can you dry a wet charger?

What you Should do if your Phone Charger Gets Wet: – 1) Absorb Water After you remove sll sources of power

Use a towel or cloth to absorb even more water Dry with cold air or put your phone in front of a fan

Leave your device in a dry place for at least an hour with the charging port facing down.2) Place Your Phone in Rice Overnight Placing your phone in rice overnight can help remove any moisture.

Why won t my charging port dry?

Sudden Moisture detected error – Devices with a waterproof rating of IP68 and above (most of the Galaxy series) are equipped with a moisture detection sensor to prevent water damage to the device. If moisture is detected in the USB port, an error message will be displayed and charging will stop. In this case, unplug your device from the charger, then wipe with a dry cloth or gently shake your device (5-10 times) with the port facing downwards to release any excess moisture. Place your phone on a cloth in a well-ventilated area, or dry with a fan. Note:

Excessive force or shaking may cause damage to your phone. When shaking your device, be gentle. You may get a Moisture detected error even if your phone did not come into contact with water. Exposure to environments with high humidity may also trigger a water drop icon. Try drying your device, and if your charging port is completely dry, restart your phone. Check that your device is placed directly in the center of the pad, without any obstructions in the way. The most common issue hindering wireless charging occurs due to improper placement on the charging pad. The wireless connection between the device and the charging pad may be interrupted, cutting off the power supply. Foldable devices such as the Galaxy Fold or Galaxy Z Flip should be closed and placed with the back side facing the charger. Please refer to the User Manual to check the charging contact point of your device model.

Does your device display the water drop icon even though it is completely dry and free of moisture? If you experience issues with charging even after drying your device, try clearing your USB cache. This should resolve your system error. Note: Device screenshots and menus may vary depending on the device model and software version. : My device displays a water drop icon and will not charge | Samsung Caribbean

Why is my iPhone saying liquid detected when its not wet?

3. Clean Your iPhone’s Lightning Port – If debris is stuck in your iPhone’s Lightning port, it may also cause charging issues. You can use the SIM-eject tool to gently clean your iPhone’s charging port and see if this resolves the “Liquid Detected” message. You should not spray cleaning agents directly onto your device or use compressed air when cleaning your iPhone.

Will a phone dry out by itself?

If you’ve dropped your phone in water and are reading this in a hurry, skip down. We’ve got all the steps you need. Here’s a summary:

Dry it off with a paper towel. This should absorb the water on the surface, leaving only the water that has gotten inside the phone. Turn off the phone ASAP. You might be able to avoid any electrical short circuiting by powering down your device. Pull out the battery and SIM card. By taking apart your phone, you can check for water that may have seeped inside. If you see moisture, gently dry it as best you can, without damaging the components. Don’t touch it for a while. The air will naturally evaporate water that has gotten inside your phone, helping it dry out as time passes.

For the rest of the details you need, read on: Don’t feel too smug just yet if you’re one of the lucky ones with a dry phone – to be blunt, it’s probably not a matter of if, but when you’ll deal with water damage to your phone. In fact, odds are you already have.

Will a phone eventually dry out?

Your smartphone got wet. Here’s what not to do first Skip the rice when your cellphone gets wet Two companies say they can rescue your drowned cellphone – no rice needed – in just a few minutes. SAN FRANCISCO — Smart phones and water just don’t mix, as millions of people suffering through this season’s massive hurricanes are learning.

Experts say even if a phone is drenched, there are steps you can take to recover it — but it takes patience and the ability to leave the phone alone.
What kills a wet phone is electricity, said Gary Tan with DE iPhone repair, a San Francisco-based company that offers multiple sites for smart phone repair and drying.

“Do not charge it. Do not plug it in to see if it works. If it’s on, electricity will flow, it will touch the water that’s inside and that’s when your fry the (circuit) board,” he said. This is also true even if your phone is still working after it was dropped in water.

You didn’t get lucky. Turn it off!” said Craig Beinecke, co-founder of TekDry, a Denver, Colo.-based company that has more than 600 sites nationwide where consumers can quickly get small electronics dried out. “We see a lot of people who come in and say, ‘I dropped it in water and I pulled it out really fast and I figured I got lucky, and then the next day the touch screen didn’t work,'” he said.

What actually happened is that it took a while for the water to reach sensitive connections inside the phone. Once it did, the water shorted them out. In a small number of cases swamped phones are able to dry out on their own over the course of days or weeks.

And while some newer phones are water resistant and or toilet, none are water proof. Related: Drying on the counter is as fast as the rice treatment

Multiple websites suggest sticking electronics that have been submerged in liquid in a bag of uncooked rice, to draw the water out. But that actually doesn’t work and can introduce dust and starch into the phone as well, said Beinecke. “We did a study, and rice was slower to work than just leaving the phone out on the counter.

And neither worked fast enough.
After about 48 hours in rice, only 13% of the water came out of the phone,” he said.
By the time the phone had fully dried out, corrosion will have had time to damage the delicate electronics inside, he said.
The preferred method to safely dry phones is to boil off the water inside them at low temperatures under vacuum.

San Antonio, Texas-based DryBox has about 60 such sites in Texas and Florida that offer self-service vacuum drying for electronics. The items are placed in a chamber slightly smaller than a shoe box and then put under vacuum while being heated. The lower the pressure, the lower the temperature at which water boils.

The machine allows the water inside the phone to boil off at temperatures that can’t damage the components, usually within about 30 minutes.
The sooner a phone is dried out, the better chance it has of surviving a dunking unscathed, said DryBox president David Naumann.
In his experience, within 36 hours the chances for success are three out of four.

After that it drops down to less than 50%. “But that’s only if they didn’t try to charge it or turn it on,” he cautioned. Both DryBox and TekDry charge $69.99 per phone. They also do car key fobs, hearing aids, fitness trackers and TV remotes. Though for those who can’t get somewhere to have their phone professionally dried, there’s still hope.

In San Francisco, Tan said he’d had people bring in phones that stopped working after being sent through a washer and didn’t bring them in for six months, figuring they were dead and gone. “We opened it up, dried it, cleaned it and in a couple of cases we’ve got them working again,” he said. Ocean water is a different story Plain water, or even toilet or flood water, is bad enough.

Salt water is another thing entirely, say experts. The salts in ocean water are strongly corrosive to electronics and can much more quickly damage a phone. If it’s impossible to get a phone dried out under vacuum within several days, there’s one last-ditch trick Naumann has to offer. How your cat can help dry your wet phone If you get your phone wet, people always recommend putting it in a bag of uncooked rice to absorb the moisture. But now, experts recommend something else that your cat has on deck. Sean Dowling (@seandowlingtv) has more. : Your smartphone got wet. Here’s what not to do first

Will my phone dry out naturally?

A) Leave Your Phone to Evaporate. – Since your phone isn’t waterlogged, the most efficient way to dry up the moisture is to let it evaporate. Just leave the phone somewhere for 1 – 2 hours to let it dry up. Moisture will naturally evaporate within a few hours when you place your phone in an open room with a warm temperature.

If you’re on a typical warm day, put your phone by the window to catalyze the drying process. If the outer part of the phone is wet, you can use a microfiber cloth or some paper towels to clean it before you put it where it can dry naturally. Meanwhile, avoid placing the phone under direct sunlight or in a room with a high temperature, trying to make it dry faster.

You’ll only introduce more problems.

Will the moisture notification go away?

My device displays a water drop icon and will not charge | Samsung Ireland If there is water in your device’s USB port or moisture is detected that exceeds a set point, charging will not be supported. This is a safety measure to protect your phone from damage and corrosion. If your device displays a water drop icon which signifies moisture detection, you should power off your device and leave it to dry completely. If the icon does not go away and you continue to experience issues with charging,, Before you try the recommendations below, be sure to check if your device’s software and related apps are updated to the latest version. To update your mobile device’s software, follow these steps: Step 1. Go to Settings > Software update. Step 2. Tap on Download and install. Step 3. Follow the on-screen instructions.

How long does it take for the moisture notification to go away?

Let the device air dry for at least 24 hours before turning it on again or plugging it into power, or else further damage may occur.

Should I emergency override liquid detected?

You could severely damage your iPhone, causing more problems in the long run. Additionally, don’t try to dry the lightning connector using an external heating source like a hair dryer or heater. The heat could damage the battery or worsen the corrosion. You also shouldn’t try blowing the water out using compressor air, or even your mouth, as you’re more likely to push the water further into your phone.