How To Propagate Snake Plant

How To Propagate Snake Plant: 4 Simple Ways

1. Snip off a leaf (close to the soil) from the mother plant.
2. Place the bottom of the sansevieria cutting in water, covering 25% of the leaf cutting.
3. Keep it in sufficient indirect sunlight.
4. Change the water weekly.
5. Optional: once roots sprout, transfer to soil.

How do you grow a snake plant from a cutting?

2. Root cuttings in water, – Rooting snake plant cuttings is as easy as placing a leaf into a jar of clean water, Begin by cutting a mature-sized leaf off an established plant. Place the cut end of the leaf in a jar or vase filled with a couple inches of water.

Can you propagate snake plant in water?

Rooting a Snake Plant in Water – Choose a container tall enough to hold the leaf. Select a healthy leaf that is not too old and use clean, sharp shears to cut it off. Put the cut end of the leaf in just enough water to cover the bottom quarter of tissue.

Is it better to propagate a snake plant in water or soil?

Propagating Snake Plants: How To Propagate Sansevieria In Water Or Soil Propagating snake plants is a fun way to expand your collection, or share your favorites with friends. In this post I’ll show you exactly how to root cuttings in soil or water, step by step.

• You’ll be pleasantly surprised to learn that it’s not difficult to propagate a snake plant, it just takes some time and patience.
• In this step by step guide I’ve shared information on how to propagate Sansevieria (aka mother-in-law’s tongue) through three different methods.
• The tips and instructions below will help you easily multiply your snake plants, and have plenty to share with friends and family too.

There are actually several easy methods for propagating snake plants. Individual leaves or even sections of them can be rooted, or mature ones can be divided to produce new babies for you to enjoy. It’s very simple to root Sansevieria leaf cuttings in either water or soil. Planting mother in laws tongue leaf cuttings Mature snake plants are great candidates for division. Each rhizome can be split into an individual start. This is the best way to enjoy several larger ones more quickly. It’s also the only way of propagating Sansevieria that will pass the exact appearance of the mother on to the babies.

1. Though it is possible to grow a mother-in-law’s tongue from seed, they’re hard to find, and take a very long time.
2. Most gardeners and even nurseries rely on cuttings or division to multiply them instead.
3. The best time to propagate your snake plant by cuttings is during the spring and summer.
4. They rest during the colder months, which can delay rooting.

When you’re ready, use these tips to take snake plant cuttings correctly. Choose healthy, hydrated leaves for the quickest, most successful rooting. Snake plant leaves can be rooted whole or as segments. You can cut a single leaf into several 3-4″ sections, and each one can become a new baby. Cutting up Sansevieria leaf for propagation If you choose to cut a leaf into sections, keep track of which side was originally facing down (toward the soil). They won’t root if planted upside down. You may find it helpful to make a V shaped notch or a slight angle across the bottom so you can keep track of the proper end. Snake plant cuttings ready to propagate Despite being very simple to propagate, snake plants can take up to three months to root, and even longer to start producing new pups. The leaf itself won’t grow, and soil propagated cuttings will appear to be doing nothing until a new pup begins to pop up through the dirt.

You can give them a light tug after a month or two. If there’s resistance, then you know the roots have begun to form. There are several reasons why your snake plant won’t propagate. Cold temperatures, lack of light, not enough time, and incorrect placement could all be culprits. Make sure they’re somewhere warm, ideally between 65-90°F, with plenty of indirect light throughout the day.

Using a and a will help to speed things up. Another reason is that they may have been planted upside down. Roots can only develop from the side of the leaf that was originally facing down. But it could also be that you haven’t given them enough time. They can take up to three months to root, and even longer before you see new pups forming. Propagating snake plant in soil Here I’ve answered some of the most commonly asked questions about propagating snake plants. If yours isn’t listed, please add it to the comments section below. Yes, you can grow a snake plant from a broken leaf as long as it’s healthy and you know which end was originally pointing downward.

Snake plants are not hard to propagate, in fact it’s pretty easy. Even beginners can successfully root the cuttings with good results. It can take several months for snake plant pups to grow. Look for them to emerge from the soil between 2-4 months after starting your cuttings. Yes you can propagate snake plants in water.

But it can take a long time, lead to rot, and the babies tend to have a harder time transitioning back to soil. Propagating snake plants may take a long time, but it’s very easy to do. You can enjoy several new Sansevierias from a single leaf, and create plenty to share with friends and family.

1. Prepare the container – Fill with a slightly moistened,, Or make your own rooting medium by mixing half with half or,
2. Dip in rooting hormone – Dip the cut end into to help encourage stronger starts and faster results.
3. Make a hole – Use your finger or a pencil to make holes in the rooting medium large enough for the cuttings so the powder won’t rub off when you plant them.
4. Plant the cuttings – Place the powdered end of each cutting 1″ down into the soil, and gently pack it down to keep them firmly upright and in place.
5. Place somewhere warm and bright – Give them plenty of bright, indirect light somewhere warm to encourage rooting, or place the container on a for even faster results. Keep the soil evenly moist, which you can monitor with a,

1. Choose a container – I like to use a or jar so I can see root development, but any shallow container that holds water and keeps your cuttings upright will work.
2. Add water – Use tepid or lukewarm water to fill your container about ½” deep. Roots form on the outer edge of the cuttings, so you only want to submerge the very bottoms to avoid rot.
3. Place somewhere bright – Put the container somewhere bright, but out of direct sun. Use a to supplement if needed.
4. Keep the water clean – Change the water every few days, or whenever it appears cloudy.

• Rooting snake plant cuttings in soil results in hardier and stronger roots. But it’s a slower process that requires a lot of patience.
• Propagating Sansevieria cuttings in water is very easy, but increases chances of rot and transplant shock. It’s a fun method to try though.

: Propagating Snake Plants: How To Propagate Sansevieria In Water Or Soil

How do you propagate a snake plant without rooting it?

How to propagate Sansevieria leaf cuttings in water. – Water propagation is easy and fast. Remember to keep the cuttings in a bright spot with indirect light. Cut off a healthy Snake plant leaf near its base. Make a notched upside down V cut at the bottom, and let the cut end dry for 2-5 days. The V cut will lift up the cuttings, and in addition to the drying, will make the new leaf cuttings less prone to rotting. After about 3 to 5 weeks, you will see roots growing from the bottom of the leaf cuttings. In another 2 to 3 weeks, tiny pups will start growing. You can transplant the rooted cuttings in soil or just let them keep growing in water.

Do snake plants like to be crowded?

Repotting Snake Plants: When & How To Do It Step By Step Repotting snake plants is pretty easy and doesn’t take much time. In this post, I’ll tell you all you need to know, and show you exactly how to do it, step by step. If your snake plant has outgrown or is cracking its container, then it’s time for repotting. Learning how to repot snake plants (aka mother-in-law’s tongue) is easy, doesn’t require any special skills, and is an important part of their long-term health.

• In this step by step guide I’ll show you how to replant them and answer all your questions.
• With this knowledge, you can keep your Sansevierias rejuvenated and thriving for years to come.
• The best time to repot Sansevieria is during the late winter or early spring.
• That allows it to settle into its new home and spend the summer putting on new growth.

But if it’s severely root-bound, and you notice it’s struggling later in the year, you can replant it in the summer or fall. Mother in laws tongue plant before repotting You’ll know your snake plant needs repotting when it’s become severely root-bound. Roots will start coming out of the drainage holes in the bottom of the pot, or they will bulge, or even crack, their container.

• Roots coming out the bottom of the container or above the soil
• Soil won’t hold water, it just runs straight through
• The pot is distorted or cracking
• Container keeps falling over (top heavy)
• Growth has slowed or stopped completely

Distorted pot from root-bound snake plant Growth rate and container size will determine how often you need to repot your mother-in-law’s tongue. In an ideal environment, they may need it every two years or so. But in containers with plenty of room to spread, they might be fine for 4-6 years. Sansevieria roots coming out drainage holes Before we get into the steps for repotting a snake plant, first let’s chat about the ideal container. Choosing the right pot and soil will help it adjust much faster. While they can do very well in a wide variety of containers, it’s ideal to choose one that’s only 1-2″ bigger than the current pot.

• The best soil for repotting snake plants is a loamy, aerated, well-draining medium.
• You can purchase a, or try making your own by combining 2 parts with 1 part of or, and 1 part,
• Related Post:
• Once your snake plant is potted up into its new container, it’s safe to,
• Keep it in an area with bright, indirect light, and don’t water again until the soil has dried out several inches down.
• I recommend you refrain from fertilizing for at least a month while it settles in to help prevent severe transplant shock.
• Related Post:

Sansevieria repotted in new a container Here I’ve answered some of the most commonly asked questions about repotting a Sansevieria. If yours isn’t on the list, please add it to the comments section below. Yes, snake plants do like to be crowded. However when they’re severely root-bound the pot can break, or they can have a hard time absorbing the water and nutrients they need.

1. Yes, you should water a snake plant after repotting, then wait until the soil has dried at least two inches down before giving it another drink.
2. You can plant two snake plants together in a single pot as long as it’s large enough to accommodate their size.
3. You technically can repot a snake plant in fall or winter.

But since it’s entering a rest period, it can cause them to become weak or leggy during the winter. For best results, wait until early spring. Now that you know how easy it is to repot snake plants, you’ll be able to respond whenever yours have outgrown their pots.

• A clean pot

1. Partially fill the pot – Place over the holes in the pot to prevent the soil from washing out. Then create a base layer of by filling the bottom of the new container about a third of the way.
2. Remove it from the old pot – Place your hand over the top, and flip the whole plant upside down. Then either gently squeeze the pot or slide a around the inside to loosen it up. Avoid pulling on the leaves to prevent damage.
3. Loosen the roots – Carefully tease apart the roots to break up the circular pattern so they can spread to fill their new container.
4. Replant at the same depth – Place the rootball into the new container at the same depth it was in the old one, and fill in around it with fresh soil.
5. Gently press down – Remove any air pockets and ensure the Sansevieria is stable by gently pressing the soil around the base. Continue to add more until the pot is full.
6. Water thoroughly – Give it a good drink to help it settle in. Make sure to drain off all the excess. Then fill in any holes with more soil, if necessary.

• Always make sure your snake plant is well hydrated before repotting.
• Never repot a brand new or an unhealthy snake plant.

: Repotting Snake Plants: When & How To Do It Step By Step

Do snake plants self propagate?

What do you do when a snake plant grows babies? – Snake plants reproduce by growing pups or babies. These babies will grow out from the mother plant via a rhizome under the soil’s surface, develop roots, and eventually sprout. If you let the plant do its thing, the baby will turn into its own plant that you can easily cut off.

Why is my snake plant not propagating in water?

Why isn’t your Snake Plant Cutting growing Roots? – It can happen. Occasionally. Not every piece of leaf is the same. Some cuttings might just not take as well as others. But usually, the answer to why your snake plant cutting isn’t growing roots is that you should give it more time.

Will snake plant rot in water?

What causes root rot in a snake plant? – The base cause of root rot in snake plants is that their roots are oversaturated in water. While overwatering is one cause of this problem, water can also accumulate around a snake plant’s root zone for other reasons. Diagnosing the particular reason that your snake plant is waterlogged is the first step in rehabilitating it – and avoiding future root rot.

How long does it take for a snake plant to propagate in water?

Did I Accidentally Murder My Baby Snake Plant? Welcome to Bad at Plants, a new column in which plant expert Maryah Greene, of, answers your questions about plants, so that we might all become at least, “A new little leaf guy started to grow from my, and I was afraid he didn’t have enough room where he was, so I tried putting him in his own pot.

1. But that was, like, months ago, and he is not growing anymore.
2. I guess if he was DEAD I would be able to tell? But he was growing so fast, and now he’s stopped?” Okay, so two things might have happened here: Possibility A: If the cutting was initially growing when placed in a new pot of soil, and has suddenly stopped growing, it is possible that the plant is exhibiting some symptoms of dormancy.

During this period, growth and development come to a temporary stop due to a multitude of factors. One of the most common is a change in environmental conditions. Possibility B: The other reason it may have stopped growing above the soil is that it’s simply stretching out its roots underneath the soil.

1. Just because you don’t see any action taking place above the soil, it doesn’t mean that growth isn’t occurring underneath.
2. Sometimes my plants show extreme amounts of growth and out of nowhere, they take a break.
3. Trust that there is still life under the soil, even if the eye can’t see it.
4. I think it’s likely Possibility B.

Taking a step back: There are different ways to propagate the plant depending on the type of plant. In the case of a snake plant, what I recommend is to start it off in some water for a bit. Because snake plants are in the cacti family, they’re used to holding a lot of moisture, which is why they don’t need to be watered as often.

It sounds like what you did was to cut the plant and put it in a new pot with fresh soil, which can totally be done, but I recommend starting in water first just so you can get the roots going and you can see that you’ve actually propagated successfully, in the sense that roots are growing in the water.

You can use a cup of water, a jar, or something that allows the plant to sit in water without touching the bottom, so there’s enough room for the roots to grow. The whole thing doesn’t need to be submerged in water. Then, you want to wait four to six weeks until you see the roots growing.

You’ll see little white sprouts come from the bottom of that cutting, and that’s a good sign after those four to six weeks that you can drop it in a pot with fresh soil. Just because you don’t see any action taking place above the soil, it doesn’t mean that growth isn’t occurring underneath. It sounds like you did what I did when I was brand-new to this whole plants thing: I took a cutting of a Monstera and plopped it in some soil and hoped for the best.

It’s not dead, and it also hasn’t grown. I was so sick of it a month ago, I pulled it out of the soil thinking I’d throw it away. It had all these really long roots in it, so it was actually growing. So what’s probably happening with yours is that it’s growing roots inside that soil system, but you’re not going to see any more growth up top until you get a substantial amount of roots growing.

The way to bypass that period is to put the piece in water to make sure the roots are growing first. Think of it as building a foundation before it can grow upward. Also, snake plants are some of the slowest-growing plants. I’m so unsatisfied with them! If you let the roots grow one to two inches in length first, you should see growth within four to six weeks of potting the snake-plant cutting.

Sometimes cuttings take a bit longer depending on how much, if any, adequate lighting they’re receiving, but that’s a general rule of thumb. You would know if it’s dead, though. (If the plant’s roots look mushy and have a dark-brown color as opposed to tan, the roots may be waterlogged, or drowning.

You should always be able to easily see the contrast in color between dark soil and tan roots.) I would recommend you (gently!) pull the cutting out of the soil to see if there are any roots there. If there are no roots, I’d say you can backtrack and plop it in some water. Otherwise, you can throw it out.

But if it’s not dying, it’s good to go. Overall, the No.1 rule of thumb: If it ain’t broke, don’t fix it. If you aren’t seeing any death in the plant, then let it do its thing on its own time. Do you have questions for Maryah? Send them to [email protected] and we’ll try to get you an answer.

Is bottom watering good for snake plants?

About Snake Plants – Native to southern Africa, snake plants are well adapted to conditions similar to those in southern regions of the United States. Because of this, they may be grown outdoors almost all year in USDA zones 8 and warmer. However, they spread by sending out underground runners and may become invasive, so treat snake plants like you would bamboo; plant it only in contained areas or pots.

Choose a pot with a drainage hole in the bottom. Terracotta pots work well for snake plants since they allow the soil to dry out more easily than plastic pots.Use a well-draining, A potting mix designed for “cacti and succulents” is ideal, as it will be more resistant to becoming oversaturated with water.When repotting snake plants, don’t bury them too deep. The plant should be planted as deep as it had been in its prior container.

Snake plants prefer bright, indirect light and can even tolerate some direct sunlight. However, they also grow well (albeit more slowly) in shady corners and other low-light areas of the home.

Tip: Try to avoid moving your plant from a low-light area to direct sunlight too quickly, as this can shock the plant. Whenever you move plants from a darker to a lighter spot, gradually expose them to brighter and brighter light over a week or so. Also be sure to adjust watering habits accordingly; plants will use more water in warmer, brighter areas.

Keep the plant in a warm spot with temperatures above 50°F (10°C). In the winter, be sure to protect it from drafty windows.

Photo by Mokkie/Wikimedia Commons One of the most common problems encountered with snake plants (and other succulents) is overwatering. These plants do not tolerate soggy soil well; they tend to develop root rot. To avoid this, follow these watering practices:

Do not water too frequently. Let the soil mostly dry out between waterings.

Tip: To know when it’s time to water, don’t just rely on how the surface of the soil looks. Instead, carefully stick your finger or a wooden chopstick a couple of inches into the soil. If you feel any moisture or see soil stick to the chopstick, hold off on watering.

Water from the bottom of the pot, if possible. This encourages the roots to grow downward and deep, helping to stabilize the thick, tall leaves. During the winter, while the plant isn’t actively growing, water less often than you would in spring and summer.

How long does it take for a snake plant to root in water?

How to propagate a snake plant in water – This method of propagating Sansevieria is super easy and really fun if you want to actually see the roots growing. No more questioning whether the cutting has rooted or not, as you can see it all happening in real-time.

All you need to start propagating a snake plant in water is a bowl or container.

Just like with propagating Sansevieria using the leaf cuttings in soil method, cut the leaves above the base and optionally divide them into small sections.

Once the cuttings are ready, place them into the water-filled container, then place this in an area that receives indirect sunlight. You’ll only need to change out the water about once a week.

At about 3 weeks, you’ll start to see roots appearing at the cut edges of the leaves, which means you’re on the right path!

In 4-5 weeks, the roots should have grown long and strong enough that you can technically repot into substrate as-is.

Some people like to keep their cuttings growing in water and that’s absolutely fine. A snake plant can grow in water pretty much indefinitely and a nice vase with a happy green plant makes a lovely addition to any shelf. Tip : You may notice the roots having grown out horizontally due to being pressed against the bottom of a bowl. © TippyTortue on Adobe Stock.

How long do snake plants live?

Frequently Asked Questions –

How long does a snake plant live? Most snake plants live up to 10 years, although some have been known to live as long as 25 years with proper care. Is the snake plant a cactus? No, but it is related to several succulents, including aloe and agave plants. What are other names for snake plant? In addition to mother-in-law’s tongue, snake plant is known as viper’s bowstring, devil’s tongue, snake tongue, and jinn’s tongue.

Why are my cuttings rotting?

Why do cuttings rot? – It’s commonly believed that cuttings rot because they’re submerged in water. This is kind of true, but also not at all. Plants can live in water forever. I keep my Thai Constellation in water, and she’s thriving. The reason cuttings rot is that over time, the oxygen level of the water drops unless it’s moving or oxygen is added.

Not only do plants need oxygen in order to grow roots (and, indeed everything else), but the bacteria that cause rotting thrive in low-oxygen environments. So we have a double whammy – low oxygen means no root growth AND bacterial infection (in the form of root rot). As long as you keep oxygen levels up (and a few other things) your plant won’t rot.

***Leaves will rot if they’re submerged (unless they’re aquatic plants), because leaves will close their stomata when they’re wet, and won’t photosynthesise until they’re dry***

How often do you water a snake plant?

Water – Your Snake Plant only needs to be watered fortnightly, allowing its soil to completely dry out between waterings to prevent overwatering and root rot. During the winter months feel free to only water your snake plant once a month if the soil is still moist after 2 weeks.

What helps cuttings root faster?

Temperature – To improve success with rooting of cuttings it is best to maintain media temperatures between 68-77°F; even cold tolerant crops such as pansy, dianthus, osteospermum, petunia, etc. prefer these media temperatures for rooting. Warm growing medium temperatures accelerate cell division which leads to faster callusing, root initial development and subsequent root growth.

• It also speeds up the dry-down rate of the growing medium, which also helps encourage better rooting.
• The best way to warm the growing medium is through bottom heat.
• Air temperature is not as important for rooting, but it is suggested that it should be set between 65-75°F.
• Air temperature becomes important when new shoot growth begins; in that, warmer temperatures encourage faster top growth.

Once roots have grown to the bottom of the plug, growing medium temperatures can be reduced or plants can be taken off bottom heat systems. This will aid in the hardening process to help the plant get use to cold shipping and growing temperatures.

How long should snake plant cuttings be?

Plant Cuttings – Once the leaf cuttings have developed roots, you can move the cuttings to soil. Roots should be at least three centimeters long before you move them to soil, but you can also leave your cuttings in water until new snake plant pups begin to sprout as well. Once you decide to move the cuttings, prepare a small pot with drainage holes with a sandy, well-draining potting mix and plant the rooted cuttings in the soil, ensuring the roots are fully buried. The Spruce / Michele Lee

What to do with snake plant babies?

Gardening FAQ The Dracaena species known as snake plants or mother-in-law’s tongue were until recently considered a separate genus, Sansevieria, but have been reclassified following molecular examination. Your mother-in-law’s-tongue or snake plant produces offshoots that pop up through the soil in this manner.

They are sometimes referred to as pups and can be removed from the parent plant to grow additional snake plants once they are a couple of inches tall. It is also fine to leave them in the pot where they are unless the offshoots are beginning to crowd the plant out of the pot. To plant up a pup as a new plant, you begin by preparing a small pot with succulent potting mixture.

Choosing a pot with a drainhole is important. Use a soil mixture that does not have any added fertilizer. Gently remove the entire plant with pups from its container. The root ball and soil will generally hold together while you explore the offshoot. Follow the offshoot under the soil to where it begins to have roots of its own and then sever the connection to the parent plant below a few roots using a sterile knife.

Now you can return the parent plant to its pot and gently plant the pup in the freshly prepared container. Make sure you insert it into the potting mixture so that the lighter white and green part of the plant is above the soil line and the darker rooting portion is below. (If you bury any part of the stem it will rot.) Care for you pup as though it is a mature plant! For more information on growing these Dracaena, visit our,

Courtesy of NYBG Plant Information Service : Gardening FAQ

Is it OK to sleep with snake plant?

However, what sets this plant apart is its ability to convert carbon dioxide (CO2) into oxygen at night, making it one of the few plants that can do so. This unique quality makes snake plants an ideal choice for bedroom decor, as they can help promote healthy airflow and improve the air quality in your sleeping space.

Is it good to sleep next to a snake plant?

2. Snake plant – The snake plant (also known as ‘mother-in-law’s tongue’) is a, It emits oxygen at night that helps you sleep better. It’s also known to remove some harmful chemicals from the air such as xylene, trichloroethylene, toluene, benzene and formaldehyde.

How do I know if my snake plant is happy?

Number 5: New Growth – When a Snake Plant is happy in its home, it responds by getting taller and sprouting new leaves. This fresh growth may spring up right at the edge of the existing rosette of leaves, or it might sprout a few inches away from the main plant.

1. The latter type of growth is often called a “pup”.
2. It’s a sign that the Snake Plant is trying to reproduce asexually by shooting out a new rhizome (a specialized root structure like an underground stem).
3. This generally means that your plant is feeling good – it’s trying to spread out within a favorable environment.

New leaves Snake Plants should look like miniature versions of the older ones, although they may be lighter in color at first and take some time to develop the same variegation. What to Watch Out For:

A Snake Plant that isn’t expanding or getting taller is probably short on a key ingredient for growth. That could be sunlight, water, fertilizer, or space in its pot. If this is the only thing that’s wrong, your plant isn’t in serious trouble, but it’s worth reassessing your care routine to see if there’s something you can improve.If the emerging foliage is shriveled or misshapen, your Sansevieria could be suffering from pest damage or a lack of important nutrients.When a Snake Plant is determined to grow but there’s too little room, it can sometimes push a new rhizome out so strongly that the container bulges, cracks, or splits wide open!

How long does it take for snake plant cuttings to root?

How Long Does a Snake Plant Take to Propagate? New snake plants are easy to propagate but are slow growers and take as many as eight weeks to sprout new root growth.

Why are my snake plant cuttings rotting in water?

Frequently Asked Questions – How often do I water a snake plant? Watering should be done at moderate levels. Once in 2 weeks should be enough. What does a snake plant look like? They possess long slender leaves. These leaves are green and each has grayish streaks on them.

What does snake plant root rot look like? A snake plant suffering from root rot would have black mushy leaf bases. What is the best way to propagate snake plants? It is best to propagate snake plants through leaf cuttings in water. Why are my snake plant cuttings rotting in water? This often happens when you use excess water in the jars.

Try reducing the water and use a healthy snake plant cutting.

Can you grow mother in law’s tongue from a cutting?

How to Grow Mother in Law’s Tongue | Yates Australia Choose a pot at least 200mm wide (or larger, depending on the size of your plant). Position in a well-lit spot, out of direct sunlight. It will also grow well in low-light areas. Remove the plant from its container and gently tease the roots.

The plant can suffer if the soil or pot/potting mix is poorly drained or it is overwatered. Mother-in-law’s tongue can be propagated by dividing clumps or taking leaf cuttings during the warmer months. Will probably need transplanting after a couple of years to keep it thick and green. Feature mother-in-law’s tongue in a mixed outdoor pot of succulents or on its own in an indoor display.

: How to Grow Mother in Law’s Tongue | Yates Australia

How do you plant cuttings in soil?

Rooting in soil – Follow trimming instruction above. Fill your pot with fresh soil until it is about 75% full. Make an indentation with your finger a few inches deep. Place the cutting into the indentation you’ve made and add more soil to fill the top of the pot.

1. Tamp down the dirt around the cuttings so they’re secure.
2. Give your cuttings a thorough drink of water until the soil is evenly moist.
3. It is incredibly important you choose a pot with a drainage hole.
4. If water cannot escape, your cuttings may become too wet and start to decay before they can properly root.

Pro tip: your freshly planted cuttings would love a boost in humidity to help kick-start their growth. Place a large glass jar or cloche (or a plastic freezer bag) over your pot to help retain humidity. If all goes well, you should have fresh new roots in a few weeks.